摘要
分析了空调器面板结构,利用三维软件设计了面板注射模结构。考虑模内抽芯滑块寿命、固定螺钉柱收缩、材料透光显示结构等设计的复杂性,前期进行手板制造验证安装的可行性。重点阐述了空调面板注射模设计流程,以及模具具体结构设计。经小批量产验证,该注射模设计方案可行,加工工艺稳定可靠,空调面板质量好,并对同类家用电器的塑件注射模设计过程及加工工艺流程具有一定的借鉴作用。
According to the comprehensive analysis of the panel structure of the air conditioner,three-dimensional sofware is used to design the structure;of the panel injection mold.Considering the complexity of the design of the core-pulling slider in the mpld,the shrinkage of the fixed screw colunn,and the light-transmitting display structure of the material,the prototype:is produced in the early stage to verify the feasibility of installation.It focuses on the design process of injection mold for air-conditioning panels,and introduces the product plastic mold structural design.Verified by small batch production,the injection mold design scheme is feasible,the processing technology is stable and reliable,and the quality of the inner panel of the air conditioner is good.It has a certain reference for the design process and processing process of the plastie injection mold of similar household appliances.
作者
熊立贵
蔡昭华
涂志刚
郭玉娜
Xiong Ligui;Cai Zhaohua;Tu Zhigang;Guo Yuna(The Open University of Guangdong(Guangdong Polytechnic Institute),Zhongshan,Guangdong 528458,CHN;TCL Air Conditioner(zhongshan)Co.,LTD.,Zhongshan,Guangdong 528400,CHN)
出处
《模具制造》
2021年第4期34-38,共5页
Die & Mould Manufacture
基金
广东开放大学高层次人才专项,项目名称:模具材料成型技术及装备研究,项目编号:RC1915。
关键词
空调器
面板
注射模
滑块结构
air conditioner
panel
injection mold
slider structure
