摘要
在数控机床安装过程中,相关人员必须严格检查机床的安装位置和准确度等情况,确保数控机床投入使用能够稳定与安全运行。数控机床在使用前必须科学合理开展状态检测与调试,并做好故障诊断与排查工作,明确机床是否存在故障问题,并及时排除故障。基于此,主要分析数控机床的装调与维修的具体内容。
During the installation process of CNC machine tools,relevant personnel must strictly check the installation position and accuracy of the machine tools to ensure stable and safe operation of the CNC machine tools when they are put into use.Before using the CNC machine tool,it is necessary to scientifically and reasonably carry out the state detection and debugging,and do a good job of fault diagnosis and troubleshooting,to determine whether the machine tool has a fault problem,and to eliminate the fault in time.Based on this,it mainly analyzes the specific content of the installation and maintenance of CNC machine tools.
作者
刘怡飞
LIU Yifei(College of Mechanical and Electrical Engineering,Guangzhou Railway Vocational and Technical College,Guangzhou 510430)
出处
《现代制造技术与装备》
2021年第3期173-174,共2页
Modern Manufacturing Technology and Equipment
基金
广州铁路职业技术学院创新工作室“交通装备表面技术创新工作室”(2020CXGZS001)。
关键词
数控机床
装调与维修
准确度
CNC machine tools
installation and maintenance
accuracy
