摘要
Carbon dioxide(CO_(2))capture by gas-separation membranes has become increasingly attractive due to its high energy efficiency,relatively low cost,and environmental impact.Polyvinylamine(PVAm)-based facilitated transport(FT)membranes were developed in the last decade for CO_(2) capture.This work discusses the challenges of applying PVAm-based FT membranes from materials to processes for postcombustion CO_(2) capture in power plants and cement factories.Experiences learned from a pilot demonstration system can be used to guide the design of other membranes for CO_(2) capture.The importance of module and process design is emphasized in the achievement of a high-performance membrane system.Moreover,the results from process simulation and cost estimation indicate that a three-stage membrane system is feasible for achieving a high CO_(2) purity of 95 vol%.The specific CO_(2) capture cost was found to significantly depend on the required CO_(2) capture ratio,and a moderate CO_(2) capture ratio of 50%presented a cost of 63.7USD per tonne CO_(2) captured.Thus,FT membrane systems were found to be more competitive for partial CO_(2) capture.
