面向5G多空口的异构网切换方法分析

Analysis of Heterogeneous Network Switching Method for 5G Multi Air Ports

为解决传统异构网切换方法切换速率低的问题,面向5G多空口分析异构网切换方法。确定异构网传输路径输出端,设计异构网路径切换单元,在state1阶段,将代码烧写到符合总线接口的存储器中,在state2阶段,自动完成枚举,在state3阶段,启动CQ1-QOUT 310,执行切换命令,实现异构网切换。并设计实例进行分析,结果表明,设计方法切换速率明显高于对照组,能够解决传统异构网切换方法切换速率低的问题。

In order to solve the problem of low switching rate of traditional switching methods for heterogeneous networks,this paper analyzes the switching methods for 5G multi air ports.The output end of the heterogeneous network transmission path is determined,and the heterogeneous network path switching unit is designed.In the stage of state1,the code is burned to the memory that conforms to the bus interface.In State2,the enumeration is done automatically.In the state3 phase,CQ1-QOUT 310 is started and the handover command is executed to realize the heterogeneous network handover.The results show that the switching rate of the design method is significantly higher than that of the control group,which can solve the problem of low switching rate of traditional heterogeneous network switching methods.