期刊文献+

船用多电机转子磁链电流模型仿真分析

Simulation Analysis of Multi Motor Coordinated Operation Based on Rotor Flux Linkage Current Model
下载PDF
导出
摘要 针对大多数船用感应电机采用一台变频器控制一台电机,成本较高的问题,本文提出了用一台变频器控制两台电动机的方案,从而降低成本。首先以转子磁链的电流模型和单电机控制方法为基础,并利用Matlab中的Simulink软件构建了一台变频器控制两台并联异步电动机的模型。然后使用ODE45算法,对两台并联的异步电动机进行仿真分析。结果表明,两台电机的最终稳态磁链幅值与给定的磁链幅值相差不大。 In view of the high cost of controlling one motor with one frequency converter in most marine applications of induction motors,a scheme of controlling two motors with one frequency converter is proposed in this paper to reduce the cost.Firstly,based on the rotor flux current model and the control method of single motor,a converter control model of two parallel asynchronous motors is built using the Simulink software in Matlab.Then,ODE45 algorithm is used to simulate the two motors.The simulation results show that the final steady-state flux amplitude of the two motors differs little from the given flux amplitude.
作者 杨辉 张剑锋 胡海军 Yang Hui;Zhang Jianfeng;Hu Haijun(College of Traffic&Transportation,Chongqing Jiaotong University,Chongqing 400074,China;School of Shipping and Naval Architecture,Chongqing Jiaotong University,Chongqing400074,China)
出处 《船电技术》 2021年第5期6-9,共4页 Marine Electric & Electronic Engineering
关键词 异步电机 电流模型 转子磁链 MATLAB仿真 asynchronous motor current model rotor flux linkage Matlab simulation
  • 相关文献

参考文献6

二级参考文献37

共引文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部