期刊文献+

液体聚丁二烯对溶聚丁苯橡胶/顺丁橡胶并用胶胎面性能的影响 被引量:2

Effect of LPBD on the property of SSBR/BR blend tread compound
下载PDF
导出
摘要 考察了3种牌号液体聚丁二烯(LPBD)取代芳烃油及不同硫磺用量对溶聚丁苯橡胶(SSBR)/顺丁橡胶(BR)并用胎面胶填料分散、物理机械性能及动态力学性能的影响。结果表明,添加3种牌号LPBD后,混炼胶的Payne效应减弱,均改善了补强填料的分散效果;硫化胶的拉伸强度、撕裂强度、耐磨性能均有提高;在相同硫磺用量下,LPBD-AL与芳烃油混合填充的并用胎面胶的抗湿滑性能基本不变,而LPBD-PM4、LPBD-N4-5000与芳烃油混合填充的并用胎面胶的抗湿滑性能稍有下降;在LPBD-AL与芳烃油混合填充的情况下,增加硫磺用量,tanδ(0℃)增大,胎面抗湿滑性能明显提升,tanδ(60℃)小幅降低,滚动阻力略有降低,胎面胶综合性能提升。 The effects of three brands of liquid polybutadiene(LPBD)substituted aromatics oil and different sulfur content on the filler dispersion,physical and mechanical properties and dynamic mechanical properties of solution polymerized styrene-butadiene rubber(SSBR)and cis-polybutadiene rubber(BR)were investigated.The results showed that the three LPBD brands all improved the dispersion effect of the reinforcing filler.The Payne effect of the compound was weakened.The tensile strength and tearing strength of vulcanized rubber increased and the abrasion loss decreased.At the same sulfur content,compared with the mixed binder filled with aromatic oil,the wet skid resistance of the mixed binder filled with LPBD-AL and aromatic oil remained basically unchanged,while the wet skid resistance of the mixed binder filled with LPBD-PM4 and N4-5000 and aromatic oil decreased slightly.In the case of mixing LPBD-AL and aromatic oil to fill,increasing the amount of sulfur,tanδat 0℃increased,and the wet skid resistance of the tread was obviously improved;tanδat 60℃decreased slightly,and the rolling resistance slightly reduced.The comprehensive performance of tire tread was improved.
作者 刘紫妍 韩流 涂杰昀 刘迪 雍占福 LIU Ziyan;HAN Liu;TU Jieyun;LIU Di;YONG Zhanfu(Key Laboratory of Rubber-Plastics of Ministry of Education,Shandong Provincial Key Laboratory of Rubber-Plastics,Qingdao University of Science&Technology,Qingdao 266042,China)
机构地区 青岛科技大学
出处 《弹性体》 CAS 北大核心 2021年第2期1-5,共5页 China Elastomerics
基金 国家自然科学基金项目(51972185)。
关键词 溶聚丁苯橡胶 顺丁橡胶 液体聚丁二烯 增塑剂 抗湿滑性 solution polymerized styrene-butadiene rubber cis-polybutadiene rubber liquid polybutadiene plasticizer wet skid resistance
  • 相关文献

参考文献7

二级参考文献51

  • 1张兴高,张炜,芦伟,王春华.定应变贮存条件下HTPB推进剂填料/黏合剂界面性能[J].推进技术,2009,30(4):484-489. 被引量:13
  • 2翁丽华,唐耀华.端羟基丁腈橡胶的合成[J].合成橡胶工业,1996,19(6):358-360. 被引量:4
  • 3吴秀兰.用动态粘弹性能预测轮胎使用性能[J].轮胎工业,1996,16(1):17-22. 被引量:16
  • 4姜亦文 李德和 等.合成端异丙黄原酰硫基液体氯丁橡胶的工艺改进[J].合成橡胶工业,1988,11(4):282-283.
  • 5Nora H M, Ebdonb J R. Telechelic liquid natural rubber: A review[J]. Progress in Polymer Science, 1998, 23(2) :143 -177.
  • 6Uraneck C A, Hsieh H L, Buck O G. Telechelic polymers [ J ]. Journal of Polymer Science, 1960,46 ( 148 ) :535 - 539.
  • 7詹姆斯·麦格劳.合成橡胶手册[M].第16版.北京:化学工业出版社,2008:97-129.
  • 8Auad M L, Aranguren M I, Borrajo J. Quasibinary and quasiternary styrene, dimethacryiate resin, and CTBN (or VTBN) liquid rubber systems: Phase diagrams, interaction parameters and cured materials morphologies [ J ] . Polymer, 2001,42 (15) :6503-6513.
  • 9Timperley C M, Arbon R E, Bird M, et al. Bis(fluoroalkyl) acrylic and methacrylic phosphate monomers, their polymers and some of their properties [ J]. Journal of Fluorine Chemistry,2003,121(1) :23 -31.
  • 10Shaboldin V P, Stalnov A K. Rules governing the effect of transition metal cations on structuring of liquid rubbers [ J ]. Polymer Science USSR, 1991,33(12) : 2513 -2518.

共引文献22

同被引文献7

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部