期刊文献+

SBR/BR/SITPV共混胶料的制备及性能研究

Preparation and properties of SBR/BR/SITPV blends
下载PDF
导出
摘要 将苯乙烯丁二烯热塑性弹性体(SBS)/丁基橡胶(IIR)动态硫化弹性体(SITPV)与丁苯橡胶(SBR)/顺丁橡胶(BR)共混制备的胶料SBR/BR/SITPV,与直接共混制备的SBR/BR/IIR胶料进行对比。结果表明,SITPV的加入会改善IIR与SBR/BR体系的相容性,降低IIR对SBR/BR体系的影响。具体表现为焦烧时间(t C10)和工艺正硫化时间(t C90)小幅度降低,共混胶料拉伸强度、撕裂强度小幅度下降,硬度有所增加,回弹性能保持稳定。同时共混胶料在0℃和10℃左右的损耗因子(tanδ)有较大的提高,说明该共混胶料的止滑性有所提高。 SBR/BR/SITPV which prepared by blending SBS/IIR dynamic vulcanized elastomer(SITPV) with SBR/BR was compared with SBR/BR/IIR prepared by direct blending.It was found that the addition of SITPV could improve the compatibility of IIR with SBR/BR system and reduce the effect of IIR on SBR/BR system.The results showed that the scorch time(tC10) and process curing time(tC90) decreased slightly, and the tensile strength and tear strength decreased slightly, and the hardness increased, and the resilience remained stable.At the same time, the loss factor(tan δ) of the blend at about 0 ℃ and 10 ℃ was greatly improved, which indicated that the anti sliding property of the blend was improved.
作者 唐梓铭 李志成 肖建斌 TANG Ziming;LI Zhicheng;XIAO Jianbin(College of Polymer Science and Engineering Qingdao University of Science and Technology,Qingdao 266042,China)
出处 《弹性体》 CAS 北大核心 2021年第2期30-33,43,共5页 China Elastomerics
关键词 反应加工 SBS/IIR动态硫化弹性体 丁苯橡胶 丁基橡胶 损耗因子 reaction processing SITPV SBR IIR tanδ
  • 相关文献

参考文献7

二级参考文献57

  • 1王佼.白炭黑制备方法及表面改性研究进展[J].北京工业职业技术学院学报,2005,4(4):48-54. 被引量:10
  • 2任慧,屈一新,赵素合.Reinforcement of Styrene-Butadiene Rubber with Silica Modified by Silane Coupling Agents: Experimental and Theoretical Chemistry Study[J].Chinese Journal of Chemical Engineering,2006,14(1):93-98. 被引量:14
  • 3夏于旻.芳纶复合材料的性能、制备及应用[J].内蒙古石油化工,2006,32(9):16-18. 被引量:15
  • 4Kuhlmann T. A new thiuram acceleration without dangerous and volatile nitrosamines[ J]. Kautschuk Gummi Kunststoffe, 1989,42:878-879.
  • 5Layer R W, Chasar D W. Minimizing nitrosamines using stefically hindered thiuram disulfides/dithiocarbamates[J]. Rubber Chemistry and Technology, 1994,67 (2) :299-313.
  • 6Ferrandino M P, Sanders J A, Hong S W. Tetrabenzylthiuram disulfide: A secondary accelerator for stable crosslink systems in tire applications [ C ]. Meeting of the American Chemical Society Rubber Division, Philadelphia. 1995.
  • 7Tinker A. Crosslink distribution and interracial adhesion in vulcanized blends of natural rubber and nitrile(NBR) [J]. Rubber Chemistry and Technology, 1990,63 : 503 -515.
  • 8Kuntz I, Zapp R L, Panchrov R J. The chemistry of the zinc oxide cure of halobutyl [ J]. Rubber Chemistry and Technology, 1984,57 ( 4 ) : 813-825.
  • 9Vukov R. Zinc oxide crosslinking chemistry of halobutyl elastomers: A model compound approach [ J]. Rubber Chemistry and Technology, 1984,57 ( 2 ) : 284-290.
  • 10Tsou A T, Waddell W H. Isobutylene-based Elastomers[ C]. Meeting of the American Chemical Society Rubber Division, Grand Rapids, MI. 2004.

共引文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部