基于Microstation的GSM-R基站三维正向设计研究

Research on the 3D forward design of GSM-R base station on microstation

铁路无线通信系统(GSM-R)基站三维正向设计对基站间距与朝向要求严格,直接使用软件Microstation建立布放模型的难度大,效率低。为此,以Microstation软件为BIM技术平台,研究开发二次开发基站三维正向设计软件。设计人员在识别线路三维中线的基础上,仅需输入基站里程和类型即可实现三维建模。经验证,新设计的软件提高了效率,降低了设计难度。

The three-dimensional forward design of GSM-R base station has strict requirements on base station spacing and orientation.It is difficult and inefficient to directly use MicroStation to establish layout model.Therefore, this paper takes MicroStation software as BIM Technology platform to develop 3 D forward design software.On the basis of identifying the three-dimensional central line of the rail line, the designer only needs to input the mileage and type of base station to realize the three-dimensional modeling.After verification, the new software improves the efficiency and reduces the difficulty of design.