摘要
根据含汞废水处理要求,选择适宜的处理流程,研究不同工艺控制条件对含汞废水反应体系中汞去除率的影响,通过增加管式微滤膜过滤和活性塔吸附设施进一步处理含汞废水,最终使出界区的废水汞含量达到更严格的标准限值要求。
According to the requirements of mercury-containing wastewater treatment,select the appropriate treatment process;study the influence of different process control conditions on the mercury removal rate in the reaction system of mercury-containing wastewater;further increase the mercury-containing wastewater by adding tubular microfiltration membrane filtration and active tower adsorption facilities make the mercury content in the waste water in the out-of-bounds area reach stricter standard limit requirements.
作者
刘晟光
马生莲
梁艳
LIU Cheng-guang;MA Sheng-lian;LIANG Yan(Ningxia Younglight Chemical Co.,Ltd.,Shizuishan 753202,China)
出处
《中国氯碱》
CAS
2021年第5期35-37,共3页
China Chlor-Alkali
关键词
含汞废水处理流程
工艺条件选择优化
TMF膜过滤
活性炭吸附
mercury-containing wastewater treatment process
optimization of process conditions selection
TMF membrane filtration
activated carbon adsorption