摘要
采用自产大孔球形氧化铝载体和专有技术研制出新型蒽醌加氢制过氧化氢(双氧水)催化剂EK-Ⅲ。制备的EK-Ⅲ催化剂比表面积为170 m 2 g以上,堆密度为0.42 g mL左右,有大比表面积、低堆密度的特性;其钯分布更广泛也更富集,载钯厚度仅为60~70μm。催化剂EK-Ⅲ在吉林市双欧化工有限公司进行了工业应用,结果表明:与国内某工业产品催化剂R相比,EK-Ⅲ催化剂在装填量少30%的情况下,每吨催化剂的双氧水产能仍高出20%以上;EK-Ⅲ催化剂活性较高、选择性较好、稳定运行周期较长。
A new hydrogenation catalyst EK-Ⅲfor producing hydrogen peroxide(H 2O 2)through anthraquinone route was developed by using self-made spherical alumina support and proprietary technology.The catalyst has the characteristics of large specific surface area(more than 170 m 2 g),low bulk density(0.42 g mL),and widely and enriched palladium distribution with the thickness of palladium of only 60-70μm.The industrial application of the catalyst EK-Ⅲin Jilin Shuang’ou Chemical Industry Co.Ltd.showed that compared with a domestic industrial product catalyst R,the capacity of hydrogen peroxide per ton of catalyst is still more than 20%higher when the loading amount of EK-Ⅲcatalyst is less than 30%,showing that the EK-Ⅲcatalyst is featured as higher activity,the better selectivity and longer stable operation cycle.
作者
陈拥军
王庆忠
张三华
倪黎
宋志东
李荣海
Chen Yongjun;Wang Qingzhong;Zhang Sanhua;Ni Li;Song Zhidong;Li Ronghai(SINOPEC Catalyst Co.Ltd.Changling Branch,Yueyang,Hunan 414012;Jilin Shuang’ou Chemical Co.Ltd.)
出处
《石油炼制与化工》
CAS
CSCD
北大核心
2021年第6期39-43,共5页
Petroleum Processing and Petrochemicals
关键词
催化剂
大孔载体
蒽醌加氢
双氧水
catalyst
macroporous support
anthraquinone hydrogen
peroxide