期刊文献+

大兆瓦风电主轴双列圆锥滚子轴承的承载接触机理 被引量:9

Contact Mechanism of Double-Row Tapered Roller Bearings of Main Shaft of Wind Turbine under Loading Condition
下载PDF
导出
摘要 在风力发电机组弹性接触承载数值分析平台的基础上,建立了风电主轴双列圆锥滚子轴承的全尺寸接触模型,并用于研究给定工况下的3MW风电主轴轴承承载接触机理。在径向载荷条件下,比较了风电轴承接触载荷有限元结果与赫兹理论计算结果,从而验证了数值模型分析的合理性;在此模型的基础上,研究了倾覆力矩对风电轴承接触载荷分布的影响规律以及极限工况下的轴承接触载荷与变形分布;最后,分析了轴承轴向游隙变化对轴承承载接触载荷的影响。通过研究发现,给定工况条件下,轴向游隙负向增大时,最大接触载荷变大,轴向游隙正向增大时,受载的滚子变少,轴承最大接触载荷不断增大。风电主轴双列圆锥滚子轴承承载接触机理研究可为大兆瓦风电轴承柔性设计技术提供理论依据。 The whole model analysis for largeMW wind turbine main shaft double row bearings,based on wind turbine elastic contact bearing numerical analysis platform,and used to study the conditions of given 3 MW wind power spindle bearings bearing contact mechanism.First,under the condition of radial load,compare the wind load bearing contact finite element analysis result and Hertz theory calculation results,to validate the rationality of the numerical model analysis;Studied the influence of overturning moment on wind turbine bearing contact load distribution rule and the limit condition of bearing contact load and deformation distribution;In the final analysis the bearing axial clearance change effect on the bearing contact load bearing.Through the study found that,Bearing clearance negative increases,the biggest contact load increasing,the bearing clearance is bigger,the loading of the roller number less,the biggest contact load increasing.The wind turbine main shaft tapered bearings contact research can provide large MW wind power bearing flexible design technology with theoretical basis.
作者 肖文 王忠强 裴世源 王凤才 XIAO Wen;WANG Zhong-qiang;PEI Shi-yuan;WANG Feng-cai(Schoool of Mechanical Engineering,Wuhan University of Science&Technology,Hubei Wuhan 430081,China;School of Mechanical Engineering,Xi'an Jiaotong University,Shaanxi Xi'an 710049,China;Institute of Advanced Bearing Manufacturing,Ningxia Shizuishan 753000,China)
出处 《机械设计与制造》 北大核心 2021年第6期90-94,共5页 Machinery Design & Manufacture
基金 国家重点基础研究发展计划项目(2011CB706601/2) 国家自然科学基金项目(51575421)。
关键词 风力发电机组 主轴轴承 双列圆锥滚子轴承 有限元模型 接触载荷 轴承游隙 Wind Turbine Main Shaft Bearings Double-Row Tapered Roller Bearings Finite Element Model(FEM) Contact Load Diameter Clearance
  • 相关文献

参考文献2

二级参考文献22

  • 1蔡崇伦.20辊森基米尔轧机结构分析[J].冶金设备,1980(3):9-21.
  • 2Milborrow D. Wind Energy -The Fastest Growing En- ergy Technology [ J ]. Foreign Science and Technology, 1999(2) :34-35.
  • 3中国机械工程学会.中国机械工程技术路线图-轴承[M].北京:科学技术出版社,2011:207-219.
  • 4轴承工业产品结构升级发展的技术路线与成组关键技术[R].iBIT,2011:1-56.
  • 5Wang F C, Wang H Y. Geometry of Spherical/Aspheric Bearings [ M ]. Encyclopaedia of Tribology, Springer, 2013:1 553- 1 564.
  • 6Wang F C, Wang H :. Elasticity Theory for Spherical Bearings [ M ]. Encyclopaedia of Tribology, Springer, 2013:866 - 874.
  • 7Wang F C, Wang H Y. Contact Mechanics of Spherical/ Aspheric Bearings [ M ]. Encyclopaedia of Tribology, Springer ,2013:470 - 477.
  • 8Wang F C. Biotribology Simulation System [ M ]. Ency- clopaedia of Tribology, Springer Inc. ,2013 : 196 - 212.
  • 9Cao M, Xiao J A. Comprehensive Dynamic Model of Double- Row Spherical Roller Bearing -Model Devel- opment and Case Studies on Surface Defects, Preloads, and Radial Cearance[ J]. Mechanical Systems and Sig- nal Processing ,2008,22 ( 2 ) :467 - 489.
  • 10Krzeminski - Freda H, Warda B. Corretion of the Roller Generators in Spherical Roller Bearings [ J ]. Wear, 1096,192:29 - 39.

共引文献2

同被引文献144

引证文献9

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部