摘要
含钼废水中钼金属浓度一般在1 g/L以上,将这些废水排放,不仅造成环境的污染,而且会造成资源的浪费。本文通过研究不同废水中钼的价态形成的机理,选取D-314树脂、ZS-1螯合树脂和HYA-18树脂对不同含钼废水进行动态吸附模拟实验,研究了影响吸附和解吸过程中的因素。
Generally,the concentration of molybdenum metal in molybdenum-containing wastewater is more than 1 g/L.The discharge of these wastewater not only causes environmental pollution,but also causes waste of resources.If an effective method can be used to recover molybdenum metal from wastewater,it will not only produce objective economic benefits,but also have the significant environmental benefits.In this paper,by studying the formation mechanism of molybdenum valence state in different wastewater,D-314,ZS-1 resin and HYA-18 resin were selected to carry out dynamic adsorption simulation experiment on different molybdenum-containing wastewater and the factors affecting the process of adsorption and desorption were studied.
作者
李渭军
王寒飞
LI Wei-jun;WANG Han-fei(Molybdenum Metallurgical Products Branch,Jinduicheng Molybdenum Co.,Ltd.,Weinan 714100,Shaanxi,China)
出处
《中国钼业》
2021年第3期45-47,共3页
China Molybdenum Industry
关键词
树脂
钼酸铵
回收
resin
ammonium molybdate
recovery