摘要
通过浸渍法制备了系列磷改性的HZSM-5分子筛,利用X射线衍射、N_(2)物理吸附、X射线荧光光谱分析、NH_(3)程序升温脱附、吡啶吸附的红外光谱等方法对其进行表征,并考察了不同磷含量的HZSM-5分子筛的结构、酸性及其在加氢蜡油裂化方面的影响规律。结果表明,随着磷含量的增加,其B酸性位减少,孔容及比表面积均有所降低。由于强B酸性位的降低抑制了氢转移反应,因此轻烯烃的选择性提高。因改性后的HZSM-5分子筛孔道堵塞,随着磷含量的增加,其活性降低明显,从而使丙烯收率呈现先升高后降低的趋势,当磷质量分数为5%时,丙烯收率最高可达5.9%。在多产丙烯助剂开发过程中,考查合适的磷含量尤为重要。
A series of phosphorus modified HZSM-5 molecular sieves are prepared by impregnation method.X-ray diffraction(XRD),N_(2) physical adsorption,X-ray fluorescence spectrometry,NH_(3) temperature-programmed desorption,and infrared spectra of pyridine adsorption methods are used for its characterization and the different phosphorus content of HZSM-5 molecular sieve structure,acidity and the influence law on hydrogenation wax cracking are examined.The results show that with the increase of phosphorus content,the B acid site decreases,and the pore volume and specific surface area decreases.The selectivity of light olefins increases due to the decrease of strong B acid site which inhibited hydrogen transfer reaction.As the modified HZSM-5 molecular sieve pore is blocked,its activity decreases significantly with the increase of phosphorus content.Therefore,the yield of propylene presents a trend of first increasing and then decreasing.When phosphorus mass fraction is 5%,propylene yield can be up to 5.9%.It is particularly important to check the appropriate phosphorus content during the development of the productive propylene additive.
作者
王文静
李新
郭振莲
陈春雨
张凤岐
Wang Wenjing;Li Xin;Guo Zhenlian;Chen Chunyu;Zhang Fengqi(Chambroad Petrochemicals,Binzhou,Shandong,China)
出处
《石油与天然气化工》
CAS
CSCD
北大核心
2021年第3期66-70,共5页
Chemical engineering of oil & gas
关键词
浸渍
磷改性
HZSM-5
活性
选择性
impregnation
phosphorus modification
HZSM-5
activity
selectivity