期刊文献+

一种基于V58300平台的集成电路功能测试系统设计 被引量:5

Design of an integrated circuit function test system based on V58300 platform
下载PDF
导出
摘要 基于中科院微电子所自主研发的V58300硬件平台,设计实现了一种集成电路功能测试系统。该系统包含上位机与下位机两部分,通过在上位机实时更改测试系统相关I/O的定义和输入的测试向量文件,即可自动完成对各种运行频率在25 MHz及以下,I/O数量在48位及以下双列直插(DIP)封装集成电路的功能测试,实现了测试系统的通用化和低成本化。最后通过实验证明本测试系统可以有效地对相关芯片进行功能测试。 Based on the V58300 hardware platform independently developed by the Institute of Microelectronics of the Chinese Academy of Sciences,an integrated circuit function test system is designed and implemented.The system includes two parts:host computer and slave computer.By changing the definition of the I/O related to the test system and the input test vector file in real time on the host computer,the functions test of Dual In-line Packaged(DIP)integrated circuits with various operating frequencies of 25 MHz and below and I/O numbers of 48 and below can be automatically completed.The system realizes the universalization and low cost of the test system.Finally,it is proved that the test system can effectively test related chips by experiments.
作者 田强 杨婉婉 李力南 郭刚 蔡莉 刘海南 罗家俊 TIAN Qiang;YANG Wanwan;LI Linan;GUO Gang;CAI Li;LIU Hainan;LUO Jiajun(School of Electronic and Information Engineering,Beijing Jiaotong University,Beijing 100044,China;Institute of Microelectronics,Chinese Academy of Sciences,Beijing 100029,China;Key Laboratory of Silicon Device Technology,Chinese Academy of Sciences,Beijing 100029,China;Department of Nuclear Physics,China Institute of Atomic Energy,Beijing 102413,China;Radiation Application Technology Innovation Center of National Defense Technology Industry,Beijing 102413,China)
出处 《太赫兹科学与电子信息学报》 2021年第3期537-540,共4页 Journal of Terahertz Science and Electronic Information Technology
基金 国防科技工业抗辐照应用技术创新中心创新基金资助项目(KFZC2018020301)。
关键词 现场可编程门阵列 集成电路测试 测试向量 功能测试 Field Programmable Gate Array integrated circuit test test vector function test
  • 相关文献

参考文献7

二级参考文献28

  • 1潘曙娟,钟杰.基于ATE的IC测试原理、方法及故障分析[J].Journal of Semiconductors,2006,27(z1):354-357. 被引量:7
  • 2刘鸿琴.ATE产业发展的新动向[J].国外电子测量技术,2004,23(6):3-4. 被引量:4
  • 3彭小平,王文杰,易江义.LabVIEW FPGA模块在测量控制系统中的开发流程及特点[J].工业控制计算机,2007,20(5):22-23. 被引量:11
  • 4刘娅,李孝辉,张慧君.基于LabWindows/CVI的仪器测试软件设计[J].微计算机应用,2007,28(8):854-858. 被引量:13
  • 5陈光禹 潘中良.可测性设计技术[M].北京:电子工业出版社,1997..
  • 6徐文波,田耘.XilinxFPGA开发实用教程[M].北京:清华大学出版社,2012.
  • 7Justin J, Lindstrom L, Jain A. Using a plug-in model to simpli- fy and enhance ATE test software capabilities[ C]//Proc of AUTOTESTCON. Anaheim, CA : IEEE ,2012 : 105-107.
  • 8Scheck G. Reducing the cost of ATE software development [ C ]//Proc of AUTOTESTCON. Anaheim, CA : IEEE, 2012 : 224-226.
  • 9Evans A C. The new ATE:protocol aware[ C ]//Proc of IEEE international test conference. Santa Clara, CA: IEEE ,2007 : 1 - 10.
  • 10Schiano L,Kim Y B,Lombardi F. Scan test of IP cores in an ATE environment[ C ]//Proc of IEEE international conference on field-programmable technology. [ s. 1. ] : IEEE ,2004:281 - 286.

共引文献15

同被引文献35

引证文献5

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部