摘要
淬透性是齿轮钢的核心指标,对成品齿轮的综合性能有很大程度的影响。通过分析C,Si,Mn,Cr,Ti,B等元素对保淬透性齿轮钢的淬透性等的影响,设计了20CrMnTiH典型齿轮钢钢种的化学成分,将C的化学成分控制在±0.01%,Si、Mn、Cr尽量窄范围控制,B控制在0.0004%以下,可以大幅度提高齿轮钢淬透性的稳定性,实现淬透性带≤3.5 HRC的水平,满足齿轮用钢的使用要求。
Hardenability is the core index of gear steel,which has a great influence on the comprehensive performance of finished gear.By analyzing the influence of C,Si,Mn,Cr,Ti and B on the hardenability of gear steel,the chemical composition of 20CrMnTiH typical gear steel is designed.The chemical composition C is controlled within±0.01%,Si,Mn and Cr are controlled within a narrow range,and B is controlled below 0.0004%,which can greatly improve the hardenability stability of gear steel and realize the hardenability band≤3.5 HRC,can meet the requirements of steel for gear.
作者
角阳娇
白晶
王猛
任海芳
朱鹏福
梁嘉琦
黄福妍
Jiao Yangjiao;Bai Jing;Wang Meng;Ren Haifang;Zhu Pengfu;Liang Jiaqi;Huang Fuyan(Yingkou Institute of Technology,Yingkou 115004,China;Shi Gang Jing Cheng Development and Equipment Manufacturing Co.,Ltd.,Yingkou 115000,China)
出处
《山东化工》
CAS
2021年第11期27-28,共2页
Shandong Chemical Industry
关键词
淬透性
齿轮钢
化学成分
窄范围控制
hardenability
gear steel
chemical composition
narrow range control
