摘要
针对工程中构件钢筋混凝土保护层厚度难以准确检测的实际问题,研发了一套环境校准试验装置,开展构件钢筋混凝土保护层厚度检测技术研究。在研究测试仪器、钢筋种类、钢筋间距、钢筋层数以及检测速度对检测结果影响的前提下,形成了一套合理、完善且适用于公路水运工程钢筋混凝土保护层厚度检测的方法和校准规程。结果显示:利用此研究成果,能够有效提高实际工程中钢筋混凝土保护层厚度检测准确率;能够节省仪器校准标准试件的制作。
Aiming at the practical problems that the thickness of reinforced concrete protective layer of the component is difficult to accurately detect,a set of environmental calibration test device was developed.Study was carried out on the detection technology of the thickness of the reinforced concrete protective layer of the component.In this paper,the influence of testing instruments,steel bar types,steel bar spacing,steel bar layers and testing speed on the testing results was studied.A set of reasonable,perfect and applicable methods and calibration procedures were formed for the detection of the thickness of reinforced concrete protective layer in highway and water transportation engineering.The results showed that engineering application could effectively improve the detection accuracy of the thickness of the protective layer of the reinforced concrete,which can save the production of calibration standard test piece.
作者
洪华
徐建红
HONG Hua;XU Jianhong
出处
《上海公路》
2021年第2期99-103,M0006,共6页
Shanghai Highways
基金
浙江省公路管理局科技计划项目(2018H17)。
关键词
环境影响因子
保护层厚度
影响因素分析
检测技术
environmental impact factors
thickness of protective layer
analysis of influencing factors
detection technology