摘要
针对自主水下航行器的发电系统,设计3种适用于摆翼发电装置的传动方案,并选出最佳方案。采用仿真软件STAR-CCM+对自主水下航行器在波面收集波浪能量进行仿真,获取发电系统的动力输入数据。设计换向增速齿轮箱,并采用软件ADAMS对齿轮箱进行仿真,以验证其工作原理。将波高0.5 m、波长5 m海况下的工作数据导入ADAMS中,获取动力输出数据。选择适合自主水下航行器的发电机,通过参数匹配得到发电系统的平均功率。
Aiming at the power generation system of AUV, three transmission schemes suitable for the flapping-foil generation device are designed and the optimum scheme is selected. The simulation software STAR-CCM+ is adopted to simulate the autonomous underwater vehicle collecting wave energy on the wave surface to obtain the power input data of the power generation system. The rectifying speed-increasing gearbox is designed, and the software ADAMS is used to simulate the gearbox to verify its working principle. The working data under the sea state with a wave height of 0.5 m and a wavelength of 5 m is imported into ADAMS to obtain power output data. The suitable generator is chosen and the average generation power can be obtained by parameter matching.
作者
朱风绅
赵江滨
魏祥庆
周建林
王宇宫
ZHU Fengshen;ZHAO Jiangbin;WEI Xiangqing;ZHOU Jianlin;WANG Yugong(School of Energy and Power Engineering,Wuhan University of Technology,Wuhan 430063,China;Reliability Engineering Institute,National Engineering Research Center for Water Transport Safety(WTS),Wuhan 430063,China;Key Laboratory of Marine Power Engineering and Technology(Ministry ofTransport),Wuhan 430063,China)
出处
《船舶工程》
CSCD
北大核心
2021年第3期83-90,共8页
Ship Engineering
基金
国家自然科学基金面上项目(51579197)
工业和信息化部高技术船舶科研项目(201622)。