期刊文献+

仿细胞外基质刚度的纤维-水凝胶混合支架研究 被引量:1

下载PDF
导出
摘要 为给体外肿瘤转移研究提供近体的物理微环境,提出了一种仿细胞外基质刚度的纤维-水凝胶混合支架制作方法,模拟体内癌变组织和正常组织的细胞外基质。采用静电纺丝技术打印纤维支架,利用等离子体灰化仪对其进行亲水改性;使用液形分析仪测试接触角,结果表明水凝胶溶液对改性后的纤维支架浸润性显著提高。利用原子力显微镜对混合支架的刚度(以弹性模量表征)进行测试:该纤维-水凝胶混合支架能够反映体内癌变组织和正常组织的细胞外基质刚度,可为体外模拟肿瘤转移、靶向药物筛选等研究提供更加真实、可靠的三维微环境。
出处 《机电技术》 2021年第3期41-45,共5页 Mechanical & Electrical Technology
基金 国家自然科学基金资助项目(51875084) 大连理工大学2020年度基本科研业务费项目(DUT20ZD103)。
  • 相关文献

参考文献3

二级参考文献10

  • 1Spearing S M.Materials issues in micro-electromechanical systems(MEMS)[J].Acta Mater,2000 (48):179-196.
  • 2Zhang G P,Takashima K,Shimajo M,et al.Fatigue behavior of microsized austeritic stainless steel specimens[J].Materials Letters,2003,57 (1):1555 -1560.
  • 3Zhang G P,Schwaiger R,Volkert C A,et al.Effect of film thickness and grain size on fatigue-induced dislocation structures in Cu thin film[J].Philosophical Magazine Letters,2003(83):477-483.
  • 4Schwaiger R,Dehm G,Kraft O.Cyclic deformation of polycrystalline Cu films[J].Philosophical Magazine,2003(83):693-710.
  • 5Kraft O,Wellner P,Hommel M,et al.Fatigue behavior of polycrystalline thin copper films[J].Zeitschrift Fur Metallkunde,2002,93 (5):392-400.
  • 6Harding J W,Sneddon I N.The elastic stresses produced by the indentation of the plane surface of a semiinfinite elastic solid by a rigid punch[J].Proc.Cambridge.Philos.Soc.,1945(41):16-26.
  • 7Sneddon I N.Fourier transforms[M].New York:Mc Graw-Hill Book Company,Inc.,1951.
  • 8Hay J C,Bolshakov A,Pharr G M.A critical examination of the fundamental relations used in the analysis of Nano-indentationdata[J].Journal of Materials Reseach,1999,14(6):2296-2305.
  • 9Lichinchi M,Lenardi C,Haupt J R,et al.Simulation of Berkovich nanoindentation experiments on thin films using finite element method[J].Thin Solid Films,1998(312):240-248.
  • 10Jian Xu Samy Lamouille Rik Derynck.TGF-β-induced epithelial to mesenchymal transition[J].Cell Research,2009,19(2):156-172. 被引量:223

共引文献12

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部