摘要
根据马钢20000 m^(3)/h液氧内压缩流程空分设备工艺流程特点,通过对20000 m^(3)/h空分设备粗氩塔投运操作方法进行有效分析与改进,保证空分设备启动稳定。文章详细叙述在20000 m^(3)/h空分设备粗氩塔投运时,粗氩塔投运方式与循环粗氩泵、气态粗氩、氩馏分流量操作方法存在问题、原因分析,介绍针对性的改进操作方法。
According to the process characteristics of the 20000 m^(3)/h liquid oxygen internal compression air separation plant in Ma'anshan Iron and Steel Co.,Ltd.,the operation method of the crude argon tower of the 20000 m^(3)/h air separation plant was effectively analyzed and improved to ensure the stable start-up of the air separation plant.In this paper,the problems existing in the operation mode of crude argon tower and the operation methods of circulating crude argon pump,gaseous crude argon and argon fraction flow when crude argon tower of 20000 m^(3)/h air separation plant was put into operation were described in detail,and the causes were analyzed.The targeted improvement operation methods were introduced.
作者
周金城
刘江淮
王胜利
ZHOU Jincheng;LIU Jianghuai;WANG Shengli(Gas Sales Branch of Ma'anshan Iron and Steel Co.,Ltd.,Ma'anshan 243000,China)
出处
《低温与特气》
CAS
2021年第3期15-17,21,共4页
Low Temperature and Specialty Gases
关键词
空分设备
内压缩流程
粗氩塔
主塔
氩馏分
氩含量
回流比
流量
air separation plant
internal compression process
crude argon column
main tower
argon fraction
argon content
reflux ratio
flow rate