摘要
为了消除空间烧孔效应实现Nd:YAG单纵模激光输出,设计了一个由两块曲率半径为60 mm的端面镜、两块1/4波片、一片偏振片和Nd:YAG晶体构成的扭转模腔,通过理论分析和仿真实验,证实了该扭转模腔在沿轴方向光强分布均匀,不会形成空间烧孔效应,实现了单一纵模的激光输出.
In order to eliminate the spatial hole burning effect and output the single longitudinal mode Nd:YAG laser,a twisted mode cavity composed of two end mirrors with a curvature radius of 60 mm,two quarter wave plates,a polarizer and Nd:YAG crystal was designed.Through theoretical analysis and simulation research,it is proved that the twisted mode cavity has uniform light intensity distribution along the axial direction and does not form the spatial hole burning effect,and the laser output of single longitudinal mode can be realized.
作者
朱浩
王博浩
陶家友
邹新长
魏勇
ZHU Hao;WANG Bohao;TAO Jiayou;ZOU Xinchang;WEI Yong(School of Physics and Electronic Science,Hunan Institute of Science and Technology,Yueyang 414006,China;Key Laboratory of Hunan Province on Information Photonics and Freespace Optical Communications,Yueyang 414006,China;Yueyang DALU Laser Technology Co.Ltd.,Yueyang,414000,China)
出处
《湖南理工学院学报（自然科学版）》
CAS
2021年第3期13-17,共5页
Journal of Hunan Institute of Science and Technology(Natural Sciences)
基金
湖南省科技计划项目(2019TP1014)
国家级大学生创新创业计划项目(教高司函[2020]13号S202010543026)。
关键词
单纵模激光
空间烧孔效应
扭转模腔法
ND:YAG激光
single longitudinal mode laser
spatial hole burning effect
twisted mode cavity method
Nd:YAG laser
