Thermal performance of a single-layer packed metal pebble-bed exposed to high energy fluxes

It is difficult to accurately measure the temperature of the falling particle receiver since thermocouples may directly be exposed to the solar flux.This study analyzes the thermal performance of a packed bed receiver using large metal spheres to minimize the measurement error of particle temperature with the sphere temperature reaching more than 700°C in experiments in a solar furnace and a solar simulator.The numerical models of a single sphere and multiple spheres are verified by the experiments.The multiple spheres model includes calculations of the external incidence,view factors,and heat transfer.The effects of parameters on the temperature variations of the spheres,the transient thermal efficiency,and the temperature uniformity are investigated,such as the ambient temperature,particle thermal conductivity,energy flux,sphere diameter,and sphere emissivity.When the convection is not considered,the results show that the sphere emissivity has a significant influence on the transient thermal efficiency and that the temperature uniformity is strongly affected by the energy flux,sphere diameter,and sphere emissivity.As the emissivity increases from 0.5 to 0.9,the transient thermal efficiency and the average temperature variance increase from 53.5%to 75.7%and from 14.3%to 27.1%at 3.9 min,respectively.The average temperature variance decreases from 29.7%to 9.3%at 2.2 min with the sphere diameter increasing from 28.57 mm to 50 mm.As the dimensionless energy flux increases from 0.8 to 1.2,the average temperature variance increases from 13.4%to 26.6%at 3.4 min.