摘要本文借助于AdvantEdge Finite Element Method(FEM)5.6切削仿真软件,利用正交试验设计方案——田口法,探究了刀具前刀面第一个微沟槽距离切削刃口的距离、微沟槽宽度、微沟槽之间的间距,以及微沟槽深度对于切削过程中的主切削力和刀具峰值温度的影响程度,设计出了三种结构参数比较合理的表面微沟槽织构刀片。
6X LWang,,K Koji.Load Carry Capacity Map for the SurfaceTexture Design of Sic Thrust Bearing Sliding in Water[].Tribology International.2003
7Xiao Wang,,Jian-Ying Zhu,,Jian Li,et al.Numerical Anal-ysis of Elasto-Hydrodynamically Lubricated Point Contacts withThree Dimensional Laser Micro-Texturing Asperity[].Inter-national Journal of Nonlinear Sciences and Numerical Simula-tion.2007
8X Wang,,J Li,,W Chen,et al.Influence of Laser Micro-Mesh Texturing on the Tribological Performance in an EHLPoint Contact Key[].Engineering Materials and Design.2007
9X Wang,,J Y Zhu,,W Chen,et al.Influence of micro-pat-terned laser surface texturing on the tribological performance[].International Journal of Computer Applications in Tech-nology.2007
10Y Kligerman,,A Shinkarenko,,I Etsion.Improving tribologi-cal performance of piston rings by partial surface texturing[].AIMETA International Tribology Conference.2004