摘要
在查明攀西地区某钒钛磁铁矿多元素分析和目的矿物成分的基础上,针对该矿石的选铁尾矿进行了磁选、重选、电选、浮选工艺研究,揭示了各工艺对不同脉石矿物的去除规律。在此基础上,确定了两种工艺流程,采用粗粒电选-细粒浮选流程,可获得精矿钛品位47.11%、回收率22.17%的指标;采用强磁精全浮流程,可获得精矿钛品位47.05%、回收率22.08%的指标。
Based on multi-element analysis and targeted mineral composition of the vanadium-titanium magnetite in Panxi area,the titanium concentrate separation including magnetic separation,gravity separation,electric separation,and flotation process had been carried out upon the iron tailings,in order to reveal removal methods of different gangue minerals by individual process.Therefore,two technological processes had been determined.The electric separation of coarse-grained particle-flotation process of fine-grained particle can be used to obtain a titanium concentrate grade of 47.11%and a recovery of 22.17%.The high intensity magnetic separation concentrate is floated with whole flotation process,and it can obtain titanium concentrate with grade 47.05%and recovery 22.08%.
作者
曹玉川
李辉跃
李禄宏
董英择
安登极
许海峰
周瑜林
王洪彬
Cao Yuchuan;Li Huiyue;Li Luhong;Dong Yingze;An Dengji;Xu Haifeng;Zhou Yulin;Wang Hongbin(Changsha Research Institute of Mining and Metallurgy Co.,Ltd.,Changsha 410012,Hunan,China;Design and Research Institute,Mineral Industry Co.,Ltd.,Pangang Group,Panzhihua 617063,Sichuan,China)
出处
《钢铁钒钛》
CAS
北大核心
2021年第2期91-98,共8页
Iron Steel Vanadium Titanium
关键词
钒钛磁铁矿
钛铁矿
重选
磁选
电选
浮选
回收率
vanadium-titanium magnetite
ilmenite
gravity separation
magnetic separation
electric separation
flotation
removal rate