期刊文献+

基于正交实验的矿用除尘器气流组织设计 被引量:1

Design of Gas Distribution of Mine Dust Collector based on Orthogonal Experiment
下载PDF
导出
摘要 本文以煤矿生产巷道内除尘器为研究对象,利用计算流体力学方法进行模拟,设计正交实验分析模拟结果,研究滤料排列方式,进口位置及抽吸压力对气流组织均匀性的影响。发现影响因素由大至小分别为进口位置、负压大小、滤料排列。在进口位置偏下、负压为-20000 Pa、滤料呈5-12-8型排列时气流组织均匀性最好。对该方案模拟验证,通过云图分析和后处理证明了正交实验的可行性。 The coal mine production roadway is taken as the research object.The method of CFD(Computational Fluid Dynamics)was used for modeling.Orthogonal experiment was designed to analyze the simulation results,and the influence of filter arrangement,inlet position and suction pressure on the uniformity of air distribution is studied.It was found that the influencing factors were inlet position,negative pressure and filter material arrangement from large to small,and the airflow distribution uniformity was the best when the inlet position was lower,the negative pressure was-20000 pa and the filter material was 5-12-8.The feasibility of the orthogonal experiment is proved by cloud image analysis and post-processing.
作者 肖培杰 邹钺 沈恒根 XIAO Pei-jie;ZOU Yue;SHEN Hen-gen(College of Environmental Science and Engineering,Donghua University)
出处 《建筑热能通风空调》 2021年第5期90-93,103,共5页 Building Energy & Environment
关键词 气流组织 正交实验 数值模拟 煤矿 air distribution orthogonal experiment numerical simulation coal mine
  • 相关文献

参考文献5

二级参考文献43

共引文献50

同被引文献20

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部