期刊文献+

屏蔽两芯线BCI等效替代辐照理论模型研究 被引量:1

Research on theoretical model of bulk current injection replacing radiation about shielded two-core wire
下载PDF
导出
摘要 针对大范围空间模拟强场电磁环境进行辐射效应试验难度大以及现有大电流注入(BCI)技术应用于非线性系统试验存在空白的问题,开展了屏蔽线耦合通道BCI等效替代辐照试验方法研究。以受试设备响应相等作为等效依据,建立了辐照法和注入法两种条件下受试设备响应的分析模型,推导出了注入激励源电压与辐照场强之间的等效对应关系,提出了BCI等效替代辐照的条件和试验方法,并进行了试验验证。研究结果表明,BCI方法是可以精确等效受试设备的辐照效应试验,试验误差不超过2 dB,能够满足工程的实际需求。 Large-scale space simulation of high field intensity electromagnetic environment is difficult to test radiation effects,and there are gaps in the application of existing BCI(bulk current injection)technology to nonlinear system tests.The research on the equivalent alternative radiation test method of the shielded cable coupling channel is carried out.Taking the equal response of the tested equipment as the equivalent basis,an analysis model of the response of the EUT(equipment under test)under the two conditions of radiation method and injection method is established.The equivalent corresponding relationship between the injection excitation source voltage and the radiation field intensity is deduced,and the conditions and test methods for the equivalent replacement of radiation with BCI are proposed and verified by experiments.The research results show that the BCI method can be accurately equivalent to the radiation effect test of the EUT,and the test error does not exceed 2 dB,which can meet the actual needs of the project.
作者 孙江宁 潘晓东 卢新福 万浩江 魏光辉 Sun Jiangning;Pan Xiaodong;Lu Xinfu;Wan Haojiang;Wei Guanghui(National Key Laboratory on Electromagnetic Environment Effects,Army Engineering University,Shijiazhuang Campus,Shijiazhuang 050003,China)
出处 《强激光与粒子束》 CAS CSCD 北大核心 2021年第7期75-85,共11页 High Power Laser and Particle Beams
基金 国家自然科学基金项目(61901521) 河北省自然科学基金项目(E2019506032)。
关键词 屏蔽线 大电流注入 非线性系统 辐射敏感度 等效替代 shielded wire bulk current injection(BCI) nonlinear system radiation sensitivity equivalent replacement
  • 相关文献

参考文献5

二级参考文献64

共引文献51

同被引文献4

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部