某消防值班楼框架结构Revit正向设计的应用

Application of Revit Forward Design of Frame Structure of a Fire Duty Building

为验证结构专业BIM正向设计的可行性,在德阳某±500 kV换流站消防驻站值班楼结构的设计中,采用Revit完成结构的布置设计,导入PKPM后处理模块生成的柱、梁、板二维配筋图,在Revit中创建了楼梯图纸、二维节点详图和梁柱截面配筋图。采用Revit软件完成全部结构施工图绘制,且未采用任何插件。提出若采用Revit软件进行BIM正向设计,需要积累和完善二维详图,且有必要开发插件在完成布置设计后读取PKPM的配筋结果,以方便地在Revit中生成平法配筋图。

In order to verify the feasibility of the forward BIM design of structural engineering major,in the design of a Reinforced concrete frame structure of a fire station of a±500 kV converter station in Deyang,Revit was used to implemente the structural layout design.The reinforcement drawing of columns,beams,and slabs generated by the PKPM post-processing module were imported.In REVIT,the stair drawings,2D node details drawings and section reinforcement drawings of beam&column were created.The Revit software is used to complete the drawing of all the structural construction drawings,and no plug-ins are used.It is proposed that if Revit software is used for BIM forward design,it is necessary to accumulate and improve the two-dimensional detailed drawings,and it is necessary to develop plug-ins to read the PKPM reinforcement results after the layout design is completed,so as to easily generate the ichnographic representing method for construction drawings in Revit.