摘要
保-平10水平分支井原采用有杆泵排采工艺,泵挂深度处在水平分支主井眼水平段,在生产中杆管偏磨问题较为突出,排采效率低,能耗高,经济效益差。该井前期生产中,杆管偏磨及煤粉堵塞等导致频繁检泵,检泵周期短,泵效低。经过反复论证,在上下行程换向、井口限压、煤粉自清洁、自携液举升4个方面进行创新设计。采用井口限压产生液力反馈驱动无杆泵下行程,避免水平井杆管偏磨;推导出不同内层管自喷携液所需最小产气量,在后期产气量上升,产水量下降后实现向自产气携液举升的转换;充分利用地层能量实现速度管携液自喷,降低能耗,降低生产运行成本,提高煤层气井生产的经济效益。
In Baoping 10 horizontal branch well,sucker rod pump drainage technology was originally used,and the pump hanging depth was in the horizontal section of the main hole of horizontal branch.In production,the problem of eccentric wearing of rod and tube was prominent,with low drainage efficiency,high energy consumption and poor economic benefit.In the early production of this well,eccentric wearing of rod and tube and coal powder blockage caused frequent pump inspection,with short pump inspection cycle and low pump efficiency.The innovative design was carried out in four aspects:up and down stroke reversing,wellhead pressure limiting,pulverized coal self-cleaning,and self-carrying liquid lifting.Hydraulic driven rodless pump was used for drainage production to avoid eccentric wearing of rod and pipe.At the same time,the conversion to self-produced gas liquid carrying lifting was realized after the gas production increased and water production decreased in the later stage,and the formation energy was fully utilized to realize the liquid carrying self-propelled by velocity pipe injection,reduce energy consumption,reduce production and operation costs,improve the economic benefits of CBM production.
作者
闫永维
李志广
刘凯
李风涛
张子佳
YAN Yongwei;LI Zhiguang;LIU Kai;LI Fengtao;ZHANG Zijia(Dagang Oilfield Petroleum Engineering Research Institute,PetroChina,Tianjin 300280,China;CBM Institute of Engineering Technology,PetroChina,Xi'an 710000,China)
出处
《石油矿场机械》
CAS
2021年第4期61-65,共5页
Oil Field Equipment
基金
中国石油天然气股份公司科技重大专项“中低煤阶煤层气开发增产技术研究”(2017E-1403)。
关键词
液力驱动
无杆泵
水平分支井
排水采气
hydraulically driven
rodless pump
horizontal multilateral well
drainage gas production