摘要
目的探讨低温等离子体灭菌器配合全程质控管理对消毒供应室器械灭菌效果及工作质量的影响。方法随机抽取2019年5月—2020年2月(实施低温等离子体灭菌器联合全程质控管理前)云浮市中医院消毒供应室医疗器械320件作为对照组,另随机抽取2020年3月—2020年12月(实施低温等离子体灭菌器联合全程质控管理后)云浮市中医院消毒供应室医疗器械320件作为研究组。对照组采用低温等离子体灭菌器配合常规管理;研究组采用低温等离子体灭菌器配合全程质控管理。比较两组消毒供应室器械灭菌效果、各环节工作质量及管理满意度。结果研究组的生物监测合格率(100.0%)高于对照组(76.8%),差异有统计学意义(P<0.05)。研究组的器械回收不合格率(1.56%)、器械清洗不合格率(0.94%)、包装不合格率(0.13%)、器械发放差错率(0.03%)低于对照组(9.06%、8.13%、9.69%、5.63%),差异有统计学意义(P<0.05)。研究组的器械管理总满意度(95.00%)高于对照组(80.00%),差异有统计学意义(P<0.05)。结论低温等离子灭菌器配合全程质控管理可增强消毒供应室器械灭菌效果及工作质量,并提高医院工作人员对器械消毒质量的满意度。
Objective To explore the effect of low-temperature plasma sterilizer with full-process quality control management on the sterilization effect and work quality of the equipment in the sterilization supply room.Methods From May 2019 to February 2020(before the implementation of low-temperature plasma sterilizer combined with full-process quality control management),320 medical devices in the sterilization supply room of Yunfu Hospital of Traditional Chinese Medicine were randomly selected as the control group.From March 2020 to December 2020(after the implementation of low-temperature plasma sterilizers and full-process quality control management),320 medical devices in the sterilization supply room of Yunfu Hospital of Traditional Chinese Medicine were randomly selected as the research group.The control group used the low-temperature plasma sterilizer with routine management,while the research group used the low-temperature plasma sterilizer with full-process quality control management.The sterilizing effect,working quality and management satisfaction of the sterilization supply room were compared between the two groups.Results The biomonitoring qualification rate of the research group(100.0%)was higher than that of the control group(76.8%),and the difference was statistically significant(P<0.05).The unqualified rate of device recovery(1.56%),cleaning(0.94%),packaging(0.13%)and device distribution error(0.03%)in the research group were lower than those in the control group(9.06%,8.13%,9.69%,5.63%),and the differences were statistically significant(P<0.05).The total satisfaction of device management in the research group(95.00%)was higher than that in the control group(80.00%),and the difference was statistically significant(P<0.05).Conclusion The combination of low-temperature plasma sterilizer and full-process quality control management enhances the sterilization effect and work quality of the equipment in the sterilization supply room,and improves the satisfaction of the hospital staff on the quality of the equipment.
作者
黄沛珍
邢刚
黄流英
何丽梅
谭欣欣
HUANG Pei-zhen;XING Gang;HUANG Liu-ying;HE Li-mei;TAN Xin-xin(Sterilization Supply Room,Yunfu Hospital of Traditional Chinese Medicine,Guangdong Province,Yunfu527300;The Second Department of Surgical,Yunfu Hospital of Traditional Chinese Medicine,Guangdong Province,Yunfu527300;Operating Room,Yunfu Hospital of Traditional Chinese Medicine,Guangdong Province,Yunfu527300)
出处
《中国当代医药》
CAS
2021年第20期219-221,225,共4页
China Modern Medicine
基金
广东省云浮市医学科学技术研究项目(2020B016)。
关键词
消毒供应室
低温等离子体灭菌器
全程质控管理
Sterilization supply room
Low-temperature plasma sterilizer
Full-process quality control management