期刊文献+

快干型环氧固化剂在水性环氧底漆中的应用 被引量:2

Application of Fast-Drying Epoxy Curing Agent in Waterborne Epoxy Primer
下载PDF
导出
摘要 对比了自制的快干型固化剂STW703K与市售固化剂在水性环氧底漆中的应用性能。对其常规的机械性能、耐盐雾性能、耐3%NaCl水溶液、耐50℃热水性能和耐碱性能进行了研究,发现这两种快干型固化剂制备的漆膜表干速度快、机械性能良好、耐盐水和耐热水性能佳。而自制快干型固化剂制备的漆膜耐盐雾性和耐碱性能更好。 The application performance of the self-made fast-drying curing agent STW703 K and the commercially available curing agent in waterborne epoxy primers were compared.The conventional mechanical properties,salt spray resistance,3%NaCl solution,50℃hot water resistance and alkali resistance were studied.The results showed that the paint film prepared by resistance these two quick-drying curing agents respectively had fast surface drying speed,good mechanical properties,good salt water resistance and hot water resistance.The paint film prepared by self-made quick-drying curing agent STW703 K had better salt fog resistance and alkali resistance.
作者 段华 刘逸昕 Duan Hua;Liu Yixin(Shanghai Huayi Fine Chemical Co.,Ltd・,Research&Development Center,Shanghai,200062,China)
出处 《上海涂料》 CAS 2021年第4期33-37,共5页 Shanghai Coatings
关键词 冷涂锌涂料 环氧树脂 丙烯酸树脂 耐盐雾性 quick-drying curing agent epoxy primer application
  • 相关文献

参考文献7

二级参考文献49

共引文献92

同被引文献12

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部