Investigation of melt-growth alumina/aluminum titanate composite ceramics prepared by directed energy deposition

Al_(2)O_(3)/Al_(6)Ti_(2)O_(13) composite ceramics with low thermal expansion properties are promising for the rapid preparation of large-scale and complex components by directed energy deposition-laser based(DED-LB)technology.However,the wider application of DED-LB technology is limited due to the inadequate understanding of process conditions.The shaping quality,microstructure,and mechanical properties of Al_(2)O_(3)/Al_(6)Ti_(2)O_(13)(6 mol%TiO_(2))composite ceramics were systematically investigated as a function of energy input in an extensive process window.On this basis,the formation mechanism of solidification defects and the evolution process of microstructure were revealed,and the optimized process parameters were determined.Results show that high energy input improves the fluidity of the molten pool and promotes the uniform distribution and full growth of constituent phases,thus,facilitating the elimination of solidification defects,such as pores and strip gaps.In addition,the microstructure size is strongly dependent on the energy input,increasing when the energy input increases.Moreover,the morphology of theα-Al_(2)O_(3) phase gradually transforms from cellular into cellular dendrite with increasing energy input due to changing solidification conditions.Under the comprehensive influence of solidification defects and microstructure size,the fracture toughness and flexural strength of Al_(2)O_(3)/Al_(6)Ti_(2)O_(13) composite ceramics present a parabolic law behavior as the energy input increases.Optimal shaping quality and excellent mechanical properties are achieved at an energy input range of 0.36-0.54 W*min^(2) g^(-1) mm^(-1).Within this process window,the average microhardness,fracture toughness,and flexural strength of Al_(2)O_(3)/Al_(6)Ti_(2)O_(13) composite ceramics are up to 1640 Hv,3.87 MPa m^(1/2),and 227 MPa,respectively.This study provides practical guidance for determining the process parameters of DED-LB of melt growth Al_(2)O_(3)/Al_(6)Ti_(2)O_(13) composite ceramics.