摘要
针对于圆柱分度凸轮机构的空间运动特点,设置相关参数,研究了Matlab编程绘制圆柱凸轮廓线的基本流程,然后根据编制好的圆柱凸轮轮廓线导入曲面建模功能较为强大的PRO/E软件进行三维设计,精确的建立了圆柱凸轮机构的模拟图形,其建模过程清晰、简练。在利用Pro/E软件的Mechanica功能对圆柱分度凸轮机构进行受力分析。利用该方法可以方便对圆柱凸轮进行建模,也可对其结构进行优化分析和设计,最终能够更好的满足使用要求,延长使用寿命。
According to the characteristics of the spatial motion of the cylindrical indexing cam mechanism,setting relevant parameters,studying the basic flow of Matlab programming and drawing the contour of the cylindrical cam.Then,according to the compiled cylindrical cam profile,the powerful Pro/E software for surface modeling is imported to carry out three-dimensional design,and the simulation figure of the cylindrical cam mechanism is established accurately.The modeling process is clear and concise.The mechanical function of Pro/E software is used to analyze the force of cylindrical indexing cam mechanism.By using this method,the cylindrical cam can be modeled conveniently,and its structure can be analyzed and optimized,which can ultimately better meet the requirements of use and prolong its service life.
作者
赵向杰
Zhao Xiangjie(Aviation Manufacturing Engineering Center,Xi an Aeronautical Polytechnic Institute,Xi an 710089,China)
出处
《粘接》
CAS
2021年第8期147-150,161,共5页
Adhesion
基金
2018年西安航空职业技术学院科研项目(18XHZH-015)。
