摘要
利用非真空感应熔炼、半连续铸造及电磁搅拌的方式,实现了Cu-5%Fe合金锭的制备,并通过现代化的成套轧制设备,实现了Cu-5%Fe合金薄板带的制备;采用金相显微镜、维氏硬度计、万能试验机等测试了其显微组织、力学性能、导电率等。另外,对Cu-5%Fe合金薄带的电磁屏蔽性能进行测试,结果显示:在14 kHz~18 GHz频率范围内,Cu-5%Fe合金的屏蔽效能都能达到60 dB(除14 kHz外)以上,可以作为军用设备的屏蔽材料。
The Cu-5%Fe alloy ingots were prepared by non-vacuum induction smelting,semi-continuous casting and electromagnetic stirring.The Cu-5%Fe alloy sheet strips were realized by modern rolling equipment.The microstructure,mechanical properties and electric conductivity were studied by metallographic microscope,Vickers hardness and universal testing machine.In addition,the electromagnetic shielding performance of the thin band of Cu-5%Fe alloy was tested,and the results show that the shielding efficiency of Cu-5%Fe alloy can reach more than 60 dB in the frequency range of 14 kHz~18 GHz,which can be used as shielding material for military equipment.
作者
周斌
郭创立
孙君鹏
王群
王小军
苟锁
梁建斌
王文斌
ZHOU Bin;GUO Chuangli;SUN Junpeng;WANG Qun;WANG Xiaojun;GOU Suo;LIANG Jianbin;WANG Wenbin(Sirui Advanced Copper Alloy Co.,Ltd,Xi'an 710000,China)
出处
《电工材料》
CAS
2021年第4期19-22,共4页
Electrical Engineering Materials
关键词
铜铁合金铸锭
铜铁合金板带
显微组织
屏蔽性
copper-iron alloy ingot
copper-iron alloy sheet and strip
microstructure
shielding properties