摘要
为提高核仪表系统计算中子注量率、中子变化率的准确性,通过分析传统V/F转换电路与I/F转换电路的工作原理及特性,介绍了一种基于I/F理论的核仪表系统设计方案,并进行实验。实验结果表明:将I/F转换技术应用于核仪表系统具备一定可行性,且测量误差在允许范围内,与传统V/F转换方式相比,I/F转换具有更好的线性。
In order to improve the accuracy of calculating neutron flux rate and neutron change rate of nuclear instrument,analyzing the working principle and characteristics of V/F conversion circuit、I/F conversion circuit introduces a design scheme of nuclear instrument based on I/F theory.The experimental results show that it is feasible to apply I/F conversion technology to nuclear instrument,and the error is within the allowable range.Compared with the V/F conversion mode,I/F conversion has better linearity.
作者
贾艺歌
杨诚
李昂
李丹
韩文兴
吴志强
JIA Yi-ge;YANG Cheng;LI Ang;LI Dan;HAN Wen-xing;WU Zhi-qiang(Nuclear Power Institute Of China,Scienceand Technologyon Reactor System Design Technology Key Laboratory,Chengdu 610213,China)
出处
《核电子学与探测技术》
CAS
北大核心
2021年第1期98-102,共5页
Nuclear Electronics & Detection Technology
基金
中国核动力研究设计院青年基金。
关键词
核仪表
微电流放大
V/F转换
I/F转换
Nuclear Instrument
Micro-current Amplification
V/F Conversion
I/F Conversion