公路工程路基路面与桥梁过渡段施工工艺

Research on Construction Technology of Transition Section Between Roadbed and Bridge in Highway Engineering

在进行公路工程建设过程中应关注路基路面与桥梁过渡段施工情况,从而保证整体工程的建设质量。但是现阶段公路工程中路基路面施工平整度不够,另外也没有综合考虑过渡段的整体性,无法保证最终施工质量,导致过渡段出现开裂或破损现象等。同时当过渡段出现不均匀沉降现象时会形成台阶,车辆行驶的过程中会出现颠簸等现象,无法保证车辆行驶安全。这样就要求相关施工单位重点管控路基路面及桥梁过渡段施工质量,最终提升整体公路工程建设质量。

In the process of highway construction,we should pay attention to the construction ofroadbed and bridge transition section,so as to ensure the construction quality of the whole project.However,the smoothness of subgrade and road surface is not enough at present,and the integrity of transition section is not considered comprehensively,so that the final construction quality can not be guaranteed and the transition section is cracked or damaged.At the same time,when uneven settlement occurs in the transition section,steps will be formed and vehicles will bump in the course of driving,which can not guarantee the safety of vehicles.This requires relevant construction units to focus on the control of subgrade Pavement and bridge transition construction quality,and ultimately improve the Overall quality of highway construction.