摘要
为了提高喷墨定位平台的精度,使喷墨定位平台在工作过程中的变形量小于0.1mm,满足工作的要求,需要对喷墨定位系统中的喷墨定位平台进行有限元分析,进而验证喷墨定位平台的变形量。首先使用Solidworks建立三维模型,然后导入ANSYS Workbench中,建立有限元模型,得到应变云图。然后与理论变形值进行对比分析,从而可以判断定位平台是否符合实际要求。
In order to improve the accuracy of the inkjet positioning platform,the deformation of the inkjet positioning platform in the working process is less than 0.1 mm,which meets the requirements of the work.Therefore,it is necessary to analyze the ink-jet positioning platform in the ink-jet positioning system by finite element method,and then verify the deformation of the ink-jet positioning platform.Firstly,SolidWorks is used to build a three-dimensional model,and then it is imported into ANSYS Workbench to build a finite element model and get the strain nephogram.Then,the results are compared with the theoretical deformation values to determine whether the positioning platform meets the actual requirements.
作者
王富豪
张阳
蔡吉飞
WANG Fu-hao;ZHANG-Yang;CAI Ji-fei(Beijing Institute of Graphic Communication,Beijing 102600,China)
出处
《绿色包装》
2021年第8期21-23,共3页
Green Packaging
基金
北京市教委科研计划一般项目(喷码印刷动态定位关键技术的研究KM2019100150005)
北京市教委面上项目(高速印刷机凸轮系统冲击问题建模及参数识别方法研究KM201810015007)。
