Neutronic analysis of deuteron-driven spallation target

Deuteron-driven spallation targets have garnered attention recently because they can provide high-energy neutrons to transmute long-lifetime fission products.In this study,the Geant4 toolkit was used to simulate the inter-action between a deuteron beam at 500 MeV and a com-posite target composed of alternating lead-bismuth eutectic(LBE)and water.The water was used because it may be employed as a target coolant.The energy spectrum,neu-tron yield,average energy,and total energy of the emitted neutrons were calculated for different thicknesses and thickness ratios between the LBE and water.For a constant target thickness,the neutron yield increases with an increasing thickness ratio of LBE to H 2 O,while the aver-age energy of the emitted neutrons decreases with an increasing in the aforementioned thickness ratio.These two aspects support the use of a pure target,either LBE or water.However,with an increasing LBE-to-H 2 O thickness ratio,the total energy of the emitted neutrons increases and then decreases.This result supports the addition of water into the LBE target.The angular distributions of the emitted neutrons show that the rear of the target is suit-able for loading nuclear waste containing minor actinides and long-lifetime fission products.