摘要
对衔铁与弹簧管的压装进行有限元分析,确定了压装质量的主要影响因素是过盈量和摩擦系数。分析结果表明过盈量对最大压装力数值、等效应力和接触应力的分布有很大影响,而摩擦系数只对最大压装力有影响,因此过盈量对压装质量的影响更大。
The press-mounting process between armature and spring tube was finite element analyzed.The main influence factors of press-mounting quality were determined.They were interference and friction coefficient.The analyzing results showed that the value of maximum press-mounting force and the distribution of contact stress and equivalent stress were influenced largely by interference.The friction coefficient could influence the value of the maximum press-mounting force only.Therefore,the interference has a greater influence on the press-mounting quality.
作者
由博
YOU Bo(Faculty of Aerospace Engineering,Jilin Institute of Chemical Technology,Jilin 132022,China)
出处
《内燃机与配件》
2021年第19期137-138,共2页
Internal Combustion Engine & Parts
关键词
衔铁
弹簧管
等效应力
接触应力
最大压装力
有限元法
armature
spring tube
equivalent stress
contact stress
maximum press-mounting force
finite element method