期刊文献+

电子真空泵保险丝熔断分析改进研究

Analysis And Improvement Of Electronic Vacuum Pump Fuse
下载PDF
导出
摘要 随着环保要求的越来越严格,国家和地方对新能源车的鼓励和支持推动了新能源车的购买需求,2021年销量更达到了136.7万辆,创了历史新高。电子真空泵作为纯电动车唯一的真空提供源,是制动系统中至关重要的部件,如产生失效故障,就无法提供真空助力,降低了制动安全性,同时非常容易乘客抱怨.本文对某车型制动系统的电子真空泵保险丝熔断的故障进行了全面分析,并通过改进彻底解决了该故障。为平台车型的开发提供了技术支持! With the increasingly stringent requirements of environmental protection,the national and local encouragement and support for new energy vehicles promote the purchase demand of new energy vehicles.In 2021,the sales volume of new energy vehicles reached 1.367 million,a record high.As the only vacuum source of pure electric vehicle,the electronic vacuum pump is the most important component in the braking system.If it fails,it will not be able to provide vacuum assistance,which reduces the braking safety.At the same time,it is very easy for passengers to complain.This paper makes a comprehensive analysis of the fuse failure of the electronic vacuum pump in the braking system of a certain model,and thoroughly solves the failure through improvement to provide technical support for the development of platform models!
作者 叶明瑞 辛庆锋 李航 贾宝光 孙福禄 胡志刚 Ye Mingrui;Xin Qingfeng;Li Hang;Jia Baoguang;Sun Fulu;Hu Zhigang
出处 《时代汽车》 2021年第20期179-181,共3页 Auto Time
关键词 电子真空泵 保险丝熔断 改进分析 electronic vacuum pump fuse blown improvement analysis
  • 相关文献

参考文献2

二级参考文献14

  • 1Jianguo Yang,Jingxia Yuan,Jun Li.Thermal error mode analysis and robust modeling for error compensation on a CNC turning center.International Journal of Machine Tools & Manufacture,39(1999),1367~1381.
  • 2Won Soo Yun,Soo Kwang Kim,Dong Woo Cho.Thermal error analysis for a CNC lathe feed drive system.International Journal of Machine Tools & Manufacture,39(1999),1087~1101.
  • 3中华人民共和国国家标准(GB/T4339-1999).金属材料热膨胀特征参数的测定.[S].国家质量技术监督局发布,2000-08-01实施..
  • 4溪同庚.工程热物理学报,1981,(2):181-181.
  • 5王补宣 任泽需.工程物理学报,1981,(2):262-262.
  • 6J E Burke.Progres in Ceramic Science,1962(2):181.
  • 7中华人民共和国国家标准(GB4339-84).金属材料热膨胀特性参数测量方法.[S].,..
  • 8Standard test method for linear thermal expansion of rigid solids with interferometry.ASTM,Designation:E289-99.
  • 9Bestimmung des mittleren thermischen Lngenausdehnungskoeffizienten,DIN ISO 7991:1998-02.
  • 10袁哲俊 王先逵.精密和超精密加工技术[M].北京:机械工业出版社,2002.9-42.

共引文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部