期刊文献+

Microstructure Characterization and Oil Absorption Performance of Superhydrophobic Cotton Cellulose Aerogel 被引量:1

下载PDF
导出
摘要 Superhydrophobic cotton cellulose (CC) aerogel was prepared from budget cotton with huge output.CC aerogels were synthesized by using commercial cotton extract as a precursor through the nano-self-assembly process,CO2 supercritical drying process,and vapor deposition.Typical,uniform hydrophobic CC aerogel structure can be confirmed by several characterization techniques.Maximum specific surface areas before and after modification are 213.80 m^(2)·g^(-1) and 184.33 m^(2)·g^(-1)with average pore sizes at 14.01 nm and 32.56 nm.The water contact angle is up to 153°,showing its superhydrophobic property.The maximum adsorption efficiency can be up to 16.0 g·g^(-1),which exhibits excellent cycling property after 5 adsorption tests.The oil absorption mechanism of the superhydrophobic CC aerogels is investigated in detail as well.This superhydrophobic CC aerogel has excellent adsorption performance and simple,rapid,effective oil contamination treatment which has promising applications in the field of oil adsorption and water remediation in oil adsorption.
作者 ZHAO Yifan PENG Changxin CUI Sheng WU Xiaodong JIANG Shengjun 赵一帆;PENG Changxin;崔升;WU Xiaodong;JIANG Shengjun(College of Materials Science and Engineering,Nanjing Tech University,Nanjing 211800,China;Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites,Nanjing Tech University,Nanjing 211800,China)
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2021年第4期538-545,共8页 武汉理工大学学报(材料科学英文版)
基金 Funded by the Key Research and Development Project of Jiangsu Province(Nos.BE2019734,BE2017151,and BE2016171) the Program of Science and Technology of Suqian City(Nos.M201704,H201801,and H201803) the National Natural Science Foundation of China(Nos.51702156 and 81471183) the Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China(IRT15R35) the Priority Academic Program Development of Jiangsu Higher Education Institutions and the Brand Major Program Development of Jiangsu Higher Education Institutions(PPZY2015B128)。
  • 相关文献

参考文献2

二级参考文献37

  • 1CUI Sheng1,LIU XueYong2,LIU Yu2,SHEN XiaoDong1,LIN BenLan1,3,HAN GuiFang1 & WU ZhanWu1 1 College of Material Science and Engineering,Nanjing University of Technology,Nanjing 210009,China,2 Institute of Chemical Materials,CAEP,Mianyang 621900,China,3 Editorial Board of Journal,Nanjing University of Technology,Nanjing 210009,China.Adsorption properties of nitrobenzene in wastewater with silica aerogels[J].Science China(Technological Sciences),2010,53(9):2367-2371. 被引量:13
  • 2Han X, Koelling KW, Tomasko DL, et al. Continuous Microcellular Polystyrene Foam Extrusion with Supercritical CO2[J]. Polymer Engineering and Science, 2002, 4201): 2 094.
  • 3Reverchon E, Adami R, Cardea S, et al. Supercritical Fluids Processing of Polymers for Pharmaceutical and Medical Applications[J]. The Journal of Supercritical Fluids, 2009, 47(3): 484-492.
  • 4Reverchon E, Cardea S. Production of Controlled Polymeric Foams by Supercritical CO2[J]. The Journal of Supercritical Fluids, 2007, 40(1): 144-152.
  • 5Ash BJ, Siegel RW, Schadler LS, et al. Mechanical Behavior of Alumina/Poly (methyl methacrylate) Nanocomposites[J]. Macromolecules, 2004, 37 (4): 1 358-1 369.
  • 6Fan Z, Gong F, Nguyen ST, et al. Advanced Multifunctional Graphene Aerogel-Poly (methyl methacrylate) Composites: Experiments and Modeling[J]. Carbon, 2015, 81:396-404.
  • 7Alzarrug FA, Dimitrijevi6 MM, Heinemann RMJ, et al. The Use of Different Alumina Fillers for Improvement of the Mechanical Properties of Hybrid PMMA Composites[J]. Materials & Design, 2015, 86:575-581.
  • 8Tsimpliaraki A, Tsivintzelis I, Marras SI, et al. The Effect of Surface Chemistry and Nanoclay Loading on the Microcellular Structure of Porous poly (d, 1 lactic acid) Nanocomposites[J]. The Journal of Supercritical Fluids, 2011, 57 (3): 278-287.
  • 9Bledzki AK, Kirschling H, Rohleder M, et al. Correlation between Injection Moulding Processing Parameters and Mechanical Properties of Microcellular Polycarbonate[J]. Journal of Cellular Plastics, 2012, 48 (4): 301-340.
  • 10Reglero Ruiz JA, Viot P, Dumon M, et al. Microcellular Foaming of Polymethylmethacrylate in a Batch Supercritical Carbon Dioxide Process: Effect of Microstructure on Compression Behavior[J]. Journal of applied polymer science, 2010, 118(1): 320-331.

共引文献4

同被引文献8

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部