摘要
大型工件在加工过程中存在难以避免的误差,误差超标将对后续的生产和加工过程产生无法弥补的影响。针对以上问题,设计了一种大型工件检测装置,并且针对其控制系统以及数据采集软件系统进行设计。多次测试结果表明:该装置的控制系统以及数据采集系统可以满足此装置采集数据的需求。
It is difficult to avoid the error of large workpiece in the processing process,while error over standard will have irreparable influence on the subsequent production and processing process.In view of the above problems,a large workpiece detection device is designed,and its control system and data acquisition software system are designed.The test results show that the control system and data acquisition system of the device can meet the requirements of data acquisition.
作者
杨荣建
吴明晖
Yang Rongjian;Wu Minghui(School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China)
出处
《农业装备与车辆工程》
2021年第10期122-125,共4页
Agricultural Equipment & Vehicle Engineering
关键词
大型构件
PLC
检测系统
数据采集
软件设计
large component
PLC
detection system
data acquisition
software design
