摘要
Seven-degree-of-freedom redundant manipulators with link offset have many advantages,including obvious geometric significance and suitability for configuration control.Their configuration is similar to that of the experimental module manipulator(EMM)in the Chinese Space Station Remote Manipulator System.However,finding the analytical solution of an EMM on the basis of arm angle parameterization is difficult.This study proposes a high-precision,semi-analytical inverse method for EMMs.Firstly,the analytical inverse kinematic solution is established based on joint angle parameterization.Secondly,the analytical inverse kinematic solution for a non-offset spherical-roll-spherical(SRS)redundant manipulator is derived based on arm angle parameterization.The approximate solution of the EMM is calculated in accordance with the relationship between the joint angles of the EMM and the SRS manipulator.Thirdly,the error is corrected using a numerical method through the analytical inverse solution based on joint angle parameterization.After selecting the stride and termination condition,the precise inverse solution is computed for the EMM based on arm angle parameterization.Lastly,case solutions confirm that this method has high precision,and the arm angle parameterization method is superior to the joint angle parameterization method in terms of parameter selection.
基金
This work was supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China(Grant No.51521003)
the Major Research Plan of National Natural Science Foundation of China(Grant No.91848202).
