天津市智慧能源调度中心综合楼工程结构设计

Structural Design of Comprehensive Building Project of Tianjin Smart Energy Dispatching Center

研究天津市智慧能源调度中心综合楼工程的结构设计,施工时首先需基层清理。应采取一系列的方法打湿水,并以砂浆为基准完成找平工作,按照图纸放线,并做详细的标记。另外,复核结构轴线满足相关需求后,弹出墙体细部尺寸线;为了确保垂直度符合相应的要求,应用线坠做相应的检查。同时,为了保证平整度满足要求,应根据线路板的情况,做出相应的检查。这样才能更好地确保智慧能源调度中心综合楼工程的结构设计顺利完成。

This focuses on structural technology of the comprehensive building project of the Smart Energy Dispatching Center in Tianjin. During the construction process,the base layer needs to be cleaned up firstly. For the base layer,a series of methods and means should be adopted to wet with water,and the mortar should be used as the basis to complete the leveling work,and the wall axis should be released according to the drawings,and detailed markings should be made. In addition,after rechecking that the structural axis meets the relevant requirements,the detailed dimension line of the wall is snapped;in order to ensure that the verticality meets the corresponding requirements,corresponding inspections should be made based on the line hammer. At the same time,in order to ensure that flatness meets the requirements,corresponding inspections should be made according to condition of the circuit board. Only in this way we can better ensure completion of the structural design of the integrated building project of the Smart Energy Dispatching Center.