摘要
针对集中式馈线系统电力故障检测率低、耗时长的问题,提出基于对等式通信的智能分布式馈线拓扑系统。阐述智能分布式馈线拓扑系统的模块构成、软件配置及馈线故障定位算法,改善智能馈线系统对电力故障的定位精度和检测性能。测试结果表明,在对等式通信方式下系统电力故障报文传输及通信延时都得到了明显改善,馈线系统故障检测率水平相对于传统设计更有优势。
Aiming at the problem of low power failure detection rate and long time of centralized feeder system, an intelligent distributed feeder topology system based on peer-to-peer communication is proposed. Based on this, the module structure, software configuration and feeder of intelligent distributed feeder topology system were described. Fault location algorithm improved positioning accuracy and detection performance of intelligent feeder system for power failure. The test results show that the system power failure message transmission and communication delay are significantly improved in the peer-to-peer communication mode, and the feeder system fault detection rate level is more advantageous than the traditional design.
作者
李高明
张福生
吴海军
黄红远
Li Gaoming;Zhang Fusheng;Wu Haijun;Huang Hongyuan(Guangdong Power Grid Corporation,Foshan 528000,Guangdong,China;Changshu Institute of Technology,Changshu 215500,Jiangsu,China;Creative Distribution Automation Co.,Ltd.,Beijing 100193,China)
出处
《计算机应用与软件》
北大核心
2021年第11期104-108,154,共6页
Computer Applications and Software
基金
广东电网有限责任公司科技项目(GDKJXM20172911)。
关键词
对等式通信
馈线拓扑系统
故障定位
拓扑结构
Pairwise communication
Feeder topology system
Fault location
Topology
