期刊文献+

二氧化碳基TPU/淀粉共混材料性能的研究 被引量:1

Study on properties of carbon dioxide-based TPU/starch blends
下载PDF
导出
摘要 以二氧化碳基TPU和玉米淀粉为原料,通过运用转矩流变仪制备一种综合性能优异的二氧化碳基共混材料.运用扫描电子隧道、电子拉力机、转矩流变仪和高压毛细管流变仪,分别研究了不同淀粉含量、不同温度对二氧化碳基共混材料的力学性能和流变性能的影响.结果表明:淀粉含量的增加会使得共混材料的拉伸性能和撕裂性能出现先增大后减小,当淀粉含量为30%时综合力学性能最好;温度的上升,会使得共混物的表观剪切应力和表观切黏度降低;随着淀粉含量的增加,共混物的综合加工性能逐渐下降. Carbon dioxide-based TPU and corn starch were used as raw materials to prepare a kind of carbon dioxide-based blend material with excellent comprehensive properties by using a torque rheometer. The effects of different starch content and different temperature on the mechanical properties and rheological properties of carbon dioxide based blendings were studied by using scanning electron tunnel, universal electronic testing machine,torque rheometer and high pressure capillary rheometer. The results show that the tensile properties and tearing properties of the blends increase first and then decrease with the increase of starch content. When the starch content is 30%,the comprehensive mechanical properties are the best.With the increase of temperature, the apparent shear stress and apparent shear viscosity of the blends decrease,and the comprehensive processing property of the blends decreases gradually with the increase of starch content.
作者 王勇攀 刘保华 宋丽娜 谢正斌 王超智 萧毅恒 WANG Yongpan;LIU Baohua;SONG Lina;XIE Zhengbin;WANG Chaozhi;XIAO Yiheng(School of Materials and Energy,Guangdong University of Technology,Laboratory of Synthesis and Application of Carbon Dioxide Based Polymer,Guangzhou 510006,China)
出处 《材料研究与应用》 CAS 2021年第4期377-381,共5页 Materials Research and Application
关键词 PPC-TPU 玉米淀粉 力学性能 毛细管流变 PPC-TPU corn starch mechanical properties capillary rheology
  • 相关文献

参考文献2

二级参考文献13

  • 1刘保华,张敏,陈立班.脂肪族聚碳酸酯聚氨酯的合成研究进展[J].聚氨酯工业,2002,17(4):6-9. 被引量:18
  • 2刘凉冰.四氢呋喃均聚醚聚氨酯弹性体——影响PTMG-PU力学性能的因素[J].化学推进剂与高分子材料,2006,4(6):9-16. 被引量:9
  • 3EISENBACH C D, BAUMGARTNER M, GUNTHER C. Advances in elastomers and rubber elasticity [ C ]. New York: Plenum, 1986:51 - 87.
  • 4YANG W P, MACOSKO C W, WELLINGHOFF S T. Thermal degradation of urethanes based on 4, 4'-diphenylmethane diisocyanate and 1, 4-butanediol (MDI/BDO) [ J ]. Polymer, 1986, 27: 35-40.
  • 5HENTSCI-IEL T, MUNSTEDT H. Kinetics of the molar mass decrease in a polyurethane melt: a rheological study [ J ]. Polymer, 2001, 42:3195-3203.
  • 6LU Qiwei, HERNANDEZ-HERNANDEZ M E. Macosko. Explaining the abnormally high flow activation energy of thermoplastic polyurethanes [J]. Polymer, 2003, 44:3309 -3318.
  • 7HERRERA M, MATUSCHEK G, KETTRUP A. Thermal degradation of thermoplastic polyurethane elastomers (TPU) based on MDI [ J]. Polym Degrad Stab, 2002, 78:323 - 331.
  • 8SAIANI A, DAUNCH W A, VERBEKE H, et al. Origin of multiple melting endotherms in a high hard block content polyurethane 1 thermodynamic investigation [ J ]. Macromolecule, 2001, 34: 9059-9068.
  • 9王东山,余爱芳,何树杰,杨淑英,陈立班.聚碳酸亚丙酯聚氨酯的合成与性能[J].高分子学报,1999,9(2):162-166. 被引量:17
  • 10崔洪犁,吴文文,孟庆莉.聚脲弹性体材料耐磨性能的探讨[J].聚氨酯工业,2014,29(6):34-37. 被引量:4

共引文献13

同被引文献12

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部