摘要
针对目前Fe^(2+):ZnSe激光器缺乏有效的高功率泵浦源这一关键瓶颈,提出了采用连续波HF化学激光器泵浦Fe^(2+):ZnSe来实现4μm波段激光输出的技术路线,结合实验和理论手段考察了此技术路线的可行性。首次获得了由连续波HF化学激光泵浦的Fe^(2+):ZnSe激光器的W级激光输出,输出功率约为1.7 W,谱线峰值波长为4.18μm,出光时间约2 s。
In view of the key bottleneck that Fe^(2+):ZnSe laser lacks effective high-power pumping source at present,the technical route of using a continuous wave HF chemical laser to pump Fe^(2+):ZnSe to achieve laser output in 4μm band is proposed.The feasibility of this technical route is investigated both experimentally and theoretically.The output of a continuous wave HF chemical laser pumped Fe^(2+):ZnSe laser at watt level is obtained for the first time.The output power is about 1.7 W,the central wavelength is 4.18μm,and the lasing lasts about 2 s.
作者
李玉佳
吴克难
金玉奇
王增强
周冬建
王锋
Li Yujia;Wu Ke’nan;Jin Yuqi;Wang Zengqiang;Zhou Dongjian;Wang Feng(Key Laboratory of Chemical Laser,Dalian Institute of Chemical Physics,Chinese Academy of Sciences,Dalian 116023,China;University of Chinese Academy of Sciences,Beijing 100049,China)
出处
《强激光与粒子束》
CAS
CSCD
北大核心
2021年第11期98-104,共7页
High Power Laser and Particle Beams
基金
国家自然科学基金项目(61875197,61205139)
中国科学院科技创新基金项目(CXJJ-19S010,CXJJ-20S010)
中国科学院青年创新促进会项目(2016168)。