摘要
测量机软件在坐标测量机中起着至关重要的作用,为更形象地展示测量机所测量点的分布,可创建标签,每个标签与被测点一一对应并用引线连接。但当移动、旋转、缩放被测工件时,标签与测量点之间的引线会彼此互相交错,造成测量机软件界面混乱甚至被测量点分布不清的现象。根据该情况本文提出了一种基于直线方程的测量机软件标签的自动排布方法,较好地解决了当被测工件移动时各标签引线互相交错的问题。实验结果表明,该方法不仅可以有效解决测量机软件中标签引线的交错问题,而且还能较好地保证结果的有效性和准确性。
Measuring machine software plays a vital role in coordinate measuring machine.In order to display the distribution of points measured by measuring machines,labels can be created.Each label corresponds to the measured point one by one and is connected with a lead.However,when moving,rotating and scaling the measured workpiece,the leads between the label and the measuring points are staggered with each other,resulting in confusion in the software interface of the measuring machine and even unclear distribution of the measured points.According to this situation,this paper proposes an automatic layout method of software labels of measuring machine based on linear equation,which solves the problem of staggered leads of labels when the measured workpiece moves.The experimental results show that the method can not only effectively solve the staggered problem of label leads in the measuring machine software,but also ensure the effectiveness and accuracy of the results.
作者
蒲松
黄河
张翔
黄浩鹏
于连栋
Pu Song;Huang He;Zhang Xiang;Huang Haopeng;Yu Liandong(School of Instrument Science and Photoelectric Engineering,Hefei University of Technology,Hefei 230009,China;不详)
出处
《工具技术》
北大核心
2021年第11期112-115,共4页
Tool Engineering
关键词
测量机软件
被测点
被测工件
标签
引线
交错
measuring machine software
measured point
measured workpiece
label
lead wire
staggered