摘要
基于对流传热理论,使用Flotherm建立老化炉热流场模型;选择合理的因素水平,通过正交试验,进行数值仿真及极差分析,获得较优水平组合;通过实测温度与优化前的温度进行比较分析。结果表明:温度场分布均匀度比原来提高56.1%,验证了数值模拟的可行性和优化方案的有效性。
Based on the theory of convective heat transfer,Flotherm is used to establish the heat flow field model of aging furnace;the reasonable factor level is selected,the numerical simulation and range analysis are carried out through orthogonal experiment,and the optimal level combination is obtained;the measured temperature is compared with the temperature before optimization.The results show that the uniformity of temperature distribution is 56.1%higher than that of the original,which verifies the feasibility of numerical simulation and the effectiveness of the optimization scheme.
作者
孙家圆
倪俊芳
杨波
SUN Jiayuan;NI Junfang;YANG Bo(School of Mechatronics,Soochow University,Suzhou 215021,China;Suzhou UB Precision Co.,Ltd.,Suzhou 215021,China)
出处
《机械工程师》
2021年第12期51-53,共3页
Mechanical Engineer
关键词
老化测试
液晶屏
正交试验
数值模拟
热流耦合
aging test
LCD screen
orthogonal test
numerical simulation
heat flow field