期刊文献+

低感设计对变流器电容纹波电流影响分析与优化

Analysis and Optimization of Influence of Low Inductance Design onCapacitor Ripple Current of Converter
下载PDF
导出
摘要 在大功率变流器产品的设计应用过程中,因母排杂散电感的不匹配导致变流器模块支撑电容纹波电流有效值偏大,电容长期工作在超额状态以致损坏。针对上述问题,根据变流器模块不同母排结构建立相对应的数学模型,分析了支撑电容电流偏大的根本原因。通过试验的方法测量提取不同母排结构的杂散电感以指导后续母排的设计。根据理论分析提出了通过优化母排设计、改善控制算法来减小母线支撑电容纹波电流。最后,基于某一变流器平台,通过测量不同试验条件下电容电流纹波,对比分析试验数据以验证所提改进措施的有效性。 In the design and application of the high power converter products,the root mean square(RMS)ripple current of the support capacitor of the converter module is too large,resulting from the mismatch of stray inductance of the busbar,and the capacitor works in excess state for a long time,resulting in damage.In view of the above problems,the corresponding mathematical model according to the different busbar structures of the converter module is established,and the root cause of the large support capacitor current is analyzed.The stray inductors of different busbar structures are measured and extracted by experiments to guide the design of subsequent busbar.According to the theoretical analysis,it is proposed to reduce the ripple current of bus support capacitor by optimizing the bus bar design and improving the control algorithm.Finally,based on a converter platform,the capacitive current ripple under different experimental conditions is measured,and the experimental data are compared and analyzed to verify the effectiveness of the proposed improved measures.
作者 谢非 马振宇 张洪浩 金祝峰 胡斯登 周晓云 XIE Fei;MA Zhenyu;ZHANG Honghao;JIN Zhufeng;HU Sideng;ZHOU Xiaoyun(Zhuzhou CRRC Times Electric Co.,Ltd.,Zhuzhou 412000,China;College of Electrical Engineering,Zhejiang University,Hangzhou 310058,China)
出处 《电机与控制应用》 2021年第11期92-97,共6页 Electric machines & control application
关键词 大功率变流器 母排杂散电感 电容纹波 数学建模 high power converter stray inductance of busbar capacitor ripple mathematical modeling
  • 引文网络
  • 相关文献

参考文献4

二级参考文献50

  • 1白华,赵争鸣,胡弦,陈昕.三电平变频调速系统中直流预励磁试验研究[J].中国电机工程学报,2006,26(3):159-163. 被引量:22
  • 2赵争鸣,张海涛,袁立强,白华,杨志.基于IGCT的高压三电平变频器失效机理及保护策略[J].电工技术学报,2006,21(5):1-6. 被引量:45
  • 3乔尔敏,温旭辉,郭新.基于IGBT并联技术的大功率智能模块研制[J].电工技术学报,2006,21(10):90-93. 被引量:13
  • 4吴斌.大功率变频器及交流传动[M].北京:机械工业出版社,2007:80-86.
  • 5Ericsen T, Khersonsky Y, Steimer P K. PEBB concept applications in high power electronics converters[C]. IEEE Power Electronics Specialists Conference, Recife, Brazil, 2005.
  • 6Hingorani N G. Power electronics building block concepts[C]. IEEE Power Engineering Society General Meeting, Toronto, Canada, 2003.
  • 7Lee F C, Peng Dengming. Power electronics building block and system integration[C]. Power Electronics and Motion Control Conference, Beijin, China, 2000.
  • 8Steimer P K. Power electronics building blocks-a platform-based approach to power electronics[C]. IEEE Power Engineering Society General Meeting, Toronto, Canada, 2003.
  • 9Lounis Z, Rasoanarivo I, Davat B. Minimization of wiring inductance in high power IGBT inverter[J]. IEEE Trans. on Power Delivery, 2000, 15(2): 551-555.
  • 10Beukes H J, Enslin J H R, Spee R. Bus bar design consideration for high power IGBT converters[C]. IEEE Power Electronics Specialists Conference, St. Louis, Missouri, USA, 1997.

共引文献96

相关主题

;
使用帮助 返回顶部