摘要
针对已在多种船舶上成功应用的轮缘推进装置(RDT)尚无专业标准和标准体系的问题,分析国内外RDT及其他船舶电力推进装置相关标准的发展现状,参考机电设备的共性特点和GB/T 13016—2018的要求,给出RDT标准体系基本构架,理清RDT的基础标准、通用标准和专用标准,建立涵盖船舶RDT设计、制造、检验,以及运维等全生命周期各环节的标准体系框架,以轴承为例,提出RDT水润滑轴承专用标准构建思路。
In view of the problem that there is no professional standard and standard system for rim-driven thruster(RDT)that has been successfully applied on various ships.The development status of RDT and other Marine electric propulsion standards at home and abroad was analyzed.With reference to the common characteristics of electromechanical equipment and the requirements of GB/T 13016-2018,the basic framework of RDT standard system was given,and the basic standard,general standard and special standard of RDT were clarified.The standard system framework for each link of the entire life cycle such as inspection and operation and maintenance was established.Taking an bearing as example,the construction ideas of RDT special standard for water lubricated bearings was put forward.
作者
宁昶雄
严新平
欧阳武
NING Chang-xiong;YAN Xin-ping;OUYANG Wu(Reliability Engineering Institute,School of Energy and Power Engineering,Wuhan University of Technology,Wuhan 430063,China;National Engineering Research Center for Water Transport Safety,Wuhan University of Technology,Wuhan 430063,China;Key Laboratory of Marine Power Engineering and Technology,Ministry of Transport,Wuhan University of Technology,Wuhan 430063,China)
出处
《船海工程》
北大核心
2021年第6期51-56,共6页
Ship & Ocean Engineering
基金
国家重点研发计划(2018YFE0197600)。
关键词
轮缘推进器
标准体系
全生命周期
专用标准
rim-driven thruster
standard system
full life cycle
special Standard
