基于Arduino的智能绿色垃圾桶的设计

Design of Smart Green Trash Can Based on Arduino

为减少资源浪费,解决公共场所的垃圾桶必须加装护盖和人们“不脏手”扔掉垃圾这种矛盾,设计了一种智能绿色垃圾桶。垃圾桶工作状态稳定,节能环保。垃圾桶分为两大部分,分别是盛装垃圾部分和电路控制部分。盛装垃圾部分使用快递纸箱制作而成,绿色环保:电路控制部分利用Ardnino开发板控制舵机模块、超声波传感器模块、红外传感器模块等制作而成。垃圾桶有两种工作模式,工作模式一:利用超声波和红外人体感应技术替代手工打开垃圾桶;工作模式二:利用手机App结合蓝牙模块无线控制垃圾桶打开,同时手机可从垃圾桶接收到实测温度、湿度数据。

The paper designs a smart green trash can,which is stable in working condition,energy-saving and environmentally friendly.The trash can is divided into two parts,which are the garbage part and the circuit control part.The circuit control part is made by using the arduino development board to control the steering gear module,the ultrasonic sensor module,and the infrared sensor module.The trash can has two working modes.Working mode 1:Using ultrasonic and infrared human body sensing technology instead of manually opening the trash can.Working mode 2:Use the mobile phone software and the bluetooth module to wirelessly control the opening of the trash can,and the mobile phone can receive the measured temperature and humidity data from the trash can at the same time.